Lenovo ThinkPad L530 (English) User Guide - Page 129

Date/Time menu, System Date

Page 129 highlights

Table 4. Config menu items (continued) Menu item Submenu item Intel (R) Rapid Start Technology Beep and Alarm Password Beep Selection • Disabled • Enabled Enter after: • Immediately • 1 minute • 2 minutes • 5 minutes • 10 minutes • 15 minutes • 30 minutes • 1 hour • 2 hours • 3 hours • Disabled • Enabled Serial ATA (SATA) CPU Keyboard Beep SATA Controller Mode Option Core Multi-Processing • Enabled • Disabled • Compatibility • AHCI • Disabled • Enabled Intel Hyper-Threading Technology • Disabled • Enabled Comments To use this feature, a special partition on the solid state drive is required. When enabled, you can enable the 30 Day Standby function through the Power Manager program. The function enables the computer to enter a lower power state after the specified time in sleep state. And it takes only seconds to resume normal operation. Enable this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will sound when the entered password matches or does not match the configured password. Enable or disable the keyboard beep when unmanageable key combinations are pressed. Select SATA controller operation mode. Enable or disable additional execution core units within a CPU. Note: If you are using a computer with a single-core processor, this item is not available. Enable or disable additional logical processors within a processor core. Date/Time menu If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup menu. The following submenu is displayed: • System Date • System Time Chapter 8. Advanced configuration 111

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184

Table 4. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
Intel (R) Rapid Start
Technology
Disabled
Enabled
Enter after:
Immediately
1 minute
2 minutes
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
2 hours
3 hours
To use this feature, a special
partition on the solid state
drive is required.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Password Beep
Disabled
Enabled
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Beep and Alarm
Keyboard Beep
Enabled
Disabled
Enable or disable the
keyboard beep when
unmanageable key
combinations are pressed.
Serial ATA (SATA)
SATA Controller Mode
Option
Compatibility
AHCI
Select SATA controller
operation mode.
Core Multi-Processing
Disabled
Enabled
Enable or disable additional
execution core units within
a CPU.
Note:
If you are using a
computer with a single-core
processor, this item is not
available.
CPU
Intel Hyper-Threading
Technology
Disabled
Enabled
Enable or disable additional
logical processors within a
processor core.
Date/Time menu
If you need to set the current date and time of your computer, select
Date/Time
from the ThinkPad Setup
menu. The following submenu is displayed:
System Date
System Time
Chapter 8
.
Advanced configuration
111