Lexmark Optra T616 Administrator's Guide (1.4 MB) - Page 35
Defragment Flash, Defective Flash, Insufficient Defrag Memory, Format Disk, Defective Disk, Job
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Utilities Menu (continued) Menu item Values Defragment Flash Yes No Defragmenting the flash memory transfers all undeleted resources stored in flash memory to printer memory and then reformats the flash memory. When the format operation is complete, the undeleted resources are loaded back into flash memory. The Defragment Flash menu item only displays if the installed flash memory is not defective or Read/Write or Write protected. 51 Defective Flash may display when the printer is turned on, or during flash format and write operations. See "51 Defective Flash" on page 107. 37 Insufficient Defrag Memory displays if printer memory is too full to perform the Flash Memory Defragment operation. See "37 Insufficient Defrag Memory" on page 105. Warning: Do not turn off the printer while the flash is defragmenting. Format Disk Yes No Formatting the hard disk deletes all resources stored on the hard disk and prepares it to receive new resources. The Format Disk menu item only displays if the installed hard disk is not defective or Read/Write or Write protected. 61 Defective Disk may display when the printer is turned on, or during disk format and write operations. See "61 Defective Disk" on page 112. Format Disk does not display if Job Buffer Size is set to 100%. Warning: If you select Format Disk and press Go, any data stored on the hard disk is lost. Do not turn off the printer while the hard disk is formatting. *Factory default Using the Operator Panel and Menus 35