Linksys SPA921 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 41
Connecting the Switch to the Router
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Connecting the Equipment Connecting and Configuring the Switch 4 Connecting the Switch to the Router In this procedure, you connect the switch to the router and a power source. STEP 1 Connect a network cable to one of the LAN ports on your router. Then connect the other end of the cable to a LAN port on the switch. STEP 2 Connect an administrative computer to an Ethernet port on the switch. The PC needs to have an IP address on the same network as the switch, which has a default IP address of 192.168.1.254. STEP 3 Connect the power cord to the back of the switch, and then connect the power adapter to an electrical outlet. The Power LED is solid amber during the Power-On Self Test (POST). Then the LED is solid green. You are ready to configure the switch. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 39