Linksys SPA921 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 62
Connection, STEP 1, WARNING
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Connecting the Equipment Configuring the SPA9000 4 STEP 1 Click OK to display the SPA9000 Network Installation - Static IP page. STEP 2 From the Connection drop-down list, choose Static IP. STEP 3 Enter the following information to configure the static IP address: WARNING Do not guess at values for the fields on this page because your SPA9000 device will not properly function without proper network settings. Refer to the information that you collected before beginning the installation. • IP Address: Enter an IP address that is out of the scope of the LAN's DHCP server. Type a period (.) to move from one octet to another. • Subnet Mask: Enter the appropriate subnet mask for your network. • Gateway: Enter the IP address of your network gateway. • Primary DNS: Enter the IP address of the DNS server for your network, which may be the same as the gateway address, as in this example. • Secondary DNS server's IP addresses as appropriate for your network. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 60