Linksys SPA921 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 95
Upgrading the Phone Firmware (If Prompted), STEP 4
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Connecting the Equipment Configuring Client Stations 4 STEP 4 Click Yes to configure another phone, or click No if you want to go to the Main Menu. Then click Next. Congratulations! You have now completed basic configuration of your IP PBX optional voice mail, and all phones. Click Exit to exit the Wizard. Upgrading the Phone Firmware (If Prompted) The Wizard verifies that each phone passes the minimum firmware version requirement and notifies you in the event that outdated firmware is detected. Complete this procedure if the following message appears: Firmware upgrade is required! You must upgrade the firmware if this message appears. If you press cancel instead of selecting a valid version of firmware for the device, an error message appears. STEP 1 Click OK to navigate to the current version of SPA9xx firmware (SPA962 in this example) that you downloaded. STEP 2 Select the spa9xx-xxx.bin firmware file, and then click Open. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 93