Linksys SPA921 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 60
Manually Inputting the SPA9000’s IP Address (If Prompted)
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Connecting the Equipment Configuring the SPA9000 4 STEP 4 Proceed according to the prompts that appear: • If the Manually Input SPA9000 IP Address page appears, troubleshoot the problem. See "Manually Inputting the SPA9000's IP Address (If Prompted)," on page 58. • If the Device is configured to use DHCP message appears, set a static IP address. See "Configuring a Static IP Address on the SPA9000 (If Prompted)," on page 59. • If the Firmware upgrade required! message appears, upgrade the SPA9000 firmware. See "Upgrading SPA9000 Firmware (If Prompted)," on page 62. • If the Wizard displays the Configure SPA9000 Voice Services page, continue to the next step in the configuration process. See "Configuring SPA9000 Voice Service Lines," on page 63. Manually Inputting the SPA9000's IP Address (If Prompted) If the Wizard cannot detect a SPA9000, the following screen appears: SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 58