Linksys SPA921 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 46
Wizard User Guide, Required Information
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connecting the Equipment Required Information 4 Wizard User Guide Click User Guide to display this User Guide. The User Guide must exist in the Wizard's messages directory. In the event that the file is not found, download this guide from the following URL: http://www.cisco.com/en/US/products/ps10030/ prod_installation_guides_list.html Then open the Wizard folder, move the file to the messages sub-directory, and change its name to ug_english.pdf. Required Information Before you start using the Wizard, use the following pages to gather the information that you will need to provide in response to the Wizard prompts. IP Addresses NOTE When choosing static IP addresses for your SPA equipment, it is recommended to set an IP address that is outside the address range assigned by the DHCP server. For example, if the DHCP server assigns IP addresses in the range from 192.168.1.50 to 192.168.1.254, you should select a static IP address between 192.168.1.2 and 192.168.1.49. • SPA9000 static IP address SPA400 static IP address Subnet mask Gateway IP address Primary DNS server IP address Secondary DNS server IP address NTP server name or IP address ITSP Information • SIP Proxy: sip com SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 44