Motorola V186 User Manual - Page 119
Assign an IP conversion Table for RTUs that has the FEP Site ID + Link ID and, GPRS Link ID. - phone
View all Motorola V186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Communications 1. Assign FEP need to have a fixed IP or host name. Make sure operator support UDP port 2002 from modem to FEP and vice versa. 2. Assign an IP conversion Table for RTUs having that FEP IP address or host name. 3. In application of RTUs transmit periodically to FEP, so it learns the recent address. Recommended time every 2 minutes. A better example is to wait for a timeout and if not getting anything from FEP send it a message. Since there is no fixed IP addresses one modem cannot communicate with another. If this is required, the FEP can be used to route information between modems as follows: 1. Assign an IP conversion Table for RTUs that has the FEP Site ID + Link ID and IP address, along with all other relevant sites it needs to communicate over that GPRS Link ID. 2. In FEP enable the 'Enable routing of MDLC over IP port' parameter for that Link ID. GPRS does not support group calls (RTU-to-RTU broadcasts). To send a frame to a group of sites, the application should send to each site individually, leaving a short wait time between each transmission (about 300 milliseconds). Configuring an RTU to operate over GPRS is the same as configuring MDLC over IP for the Standard modem connection. If a modem configuration file is used (e.g. G18.stm), this too must be downloaded to the appropriate RTU port. Note that before downloading the modem configuration file for GPRS, you need to change its APN according to your operator instructions. The APN (Access Point Name) is an address such as intranet.motorola.com. The APN defines the security and capabilities set by your provider for your SIM cards. Note: Each SIM Card has unique identifiers for a GPRS/GSM modem. Placing a given SIM card on different modems causes the same settings to be retrieved from infrastructure (phone number, IP Address etc.) regardless of the modem. Use the STS Add-Ons Manager and Downloader to select the modem configuration file for the specified port and download the G18.stm file. 115