Motorola V186 User Manual - Page 168
AO Module Specifications, Module error LED, Voltage mode LED, Current mode
View all Motorola V186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Appendix A - ACE3600 Specifications AO Module Specifications Total Number of Outputs Output Arrangement 4 AO current (0-20 mA) or voltage (0-10 V) Isolated floating channels, each channel can be connected as 0-20 mA or 0-10 V DC voltage D to A Resolution 14 bit Output Accuracy Temperature Stability ±0.1% full scale @ 25ºC 25 PPM/ºC Internal Settling Time Max. 1.0 msec Output Load Voltage: > 1.0 kΩ, < 1.0 µf Current: < 750 Ω (internal power source) Crosstalk Rejection Interference suppression Better than 50 dB between any pair of outputs Common mode rejection > 60 dB Output Protection Voltage output: short circuit current, max. 30 mA Current output: No-load voltage max. 22 V DC Diagnostic LEDs Module error LED, Voltage mode LED, Current mode LED, Calibration LED per channel User Connection 2 Terminal Blocks (3.5mm pitch), Maximum 18 AWG Cable and TB Holder 20 Wire Cable with TB Holder connector, 26 AWG Module Replacement Hot swap replacement- module extraction/insertion under voltage Isolation 1.5 kV between output and module logic Insulation Operating voltage Insulation resistance 100 MΩ @ 500 V DC, per IEC602555 10.8-16 V DC and 3.3 V DC (from the motherboard connector) Power Consumption Refer to Appendix C: ACE3600 Maximum Power Ratings. Dimensions Weight 37 mm W x 225 mm H x 180 mm D, (1.5" W x 8.7" H x 7.1" D) Approx. 0.29 Kg (0.64 Lb) Specifications subject to change without notice. 164