Motorola V186 User Manual - Page 92
Mounting the ACE3600 Frame on a Wall, Wall Mount Installation
View all Motorola V186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
ACE3600 Installation Guidelines Mounting the ACE3600 Frame on a Wall WARNING: Before drilling holes for mounting the frame, make sure there are no electrical wires installed inside the wall at the holes' location. CAUTION: If the ACE3600 is subject to high levels of shock or vibration, you must take suitable measures to reduce the acceleration or amplitude. We recommend that you install the ACE3600 on vibration-damping materials (for example, rubber-metal anti-vibration mountings). Wall Mount Installation For convenient installation of the ACE3600 RTU on a wall, allow an additional 6 cm (2.4") (in W, H) and 7 cm (2.75") (in D) around the plate. Four holes are provided, one in each corner of the RTU metal chassis, for wall mounting the RTU. The figures below show the dimensions (in mm) of the various frames/metal chassis and the distances between the holes. 295 mm 410 mm 330 mm 443 mm Small Metal Chassis Large Metal Chassis Small/Large Metal Chassis Installation Dimensions and Screw Holes for Installation 88