Nikon COOLPIX P510 User Manual - Page 231
Error Messages - deals
View all Nikon COOLPIX P510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Error Messages The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them. Display Description Solution A Make sure that the lens cap has been Q removed, then turn the camera on Turn the camera off, remove the lens cap, and Lens cap is attached or lens error occurred. again. If the error persists even after the camera is turned off and then on 23 turn the camera on. again, contact retailer or Nikon- authorized service representative. O (blinks) N Battery exhausted. Clock not set. Set date and time. Battery exhausted. Charge or replace the battery. 188 18, 20 Turn off camera, and allow battery to cool down before resuming use. Five seconds after this message appears, P Battery temperature high Battery temperature is high. the monitor is turned off, and the power-on lamp flickers. After the lamp blinks for three minutes, the 23 camera turns off automatically, but you can also press the power switch to turn it off manually. P The camera will turn off to prevent overheating. Inside of the camera has become hot. The camera turns off automatically. Leave the camera off until the inside of the camera has cooled and then turn it on again. - Q (blinks red) P Please wait for the camera to finish recording. N Memory card is write protected. P No card present. Camera cannot focus. • Refocus. • Use focus lock. 32, 33 33 Camera cannot perform other operations until recording is complete. Wait until message clears from display automatically when recording is complete. - Write-protect switch is Slide the write-protect switch to in "lock" position. "write" position. 27 No memory card is inserted when trying to record a movie. Insert a memory card before starting movie recording. 157 Technical Notes and Index 217