Olympus D560 D-560 Zoom Reference Manual - English (6.6MB) - Page 123
The image quality is poor
UPC - 050332140714
View all Olympus D560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Troubleshooting The image quality is poor The picture is too bright. Possible cause The flash was set to the fill-in flash mode. The subject was excessively illuminated. Corrective action Select a flash mode other than fill-in flash. Adjust the exposure compensation toward minus (-) or change the camera position. Ref. Page P.58 P.74 The picture is too dark. Possible cause Corrective action Ref. Page The flash was blocked by your finger. Hold the camera correctly, keeping your fingers away from the flash. P.30 The subject was out of the working range of the flash. Shoot within the flash working range. P.58 The flash was set to the Select a flash mode other than flash off. flash off mode. P.58 The subject was too small and was backlit. Set the flash to fill-in mode, or use the spot metering mode. P.58, 64 The sequential shooting mode was used. Higher shutter speeds are used when the sequential shooting mode is selected, which may result in pictures that are darker than usual. Select in the DRIVE menu. P.65 Bright subjects such as Adjust the exposure compensation toward +. snow will turn out darker 8 than their natural colors in the image. P.74 Miscellaneous The colors of pictures taken indoors look unnatural. Possible cause Corrective action Ref. Page Indoor lighting can affect Set the white balance according to the lighting. the picture's colors. P.76 There is no white in the Include something white in the picture, or subject. shoot using the fill-in flash mode. P.58 The white balance setting is wrong. Adjust the white balance according to the light source. P.76 122