Olympus D560 D-560 Zoom Reference Manual - English (6.6MB) - Page 26
If the card is not recognized (card check), Monitor, indication, Corrective action
UPC - 050332140714
View all Olympus D560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Getting started Power on/off If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed. • All data stored on the card is erased when the card is formatted. 1 Note Monitor indication NO CARD CARD%SEtUP POWER%OFF SELECt FORMAt GO Corrective action There is no card in the camera or the card is not inserted properly. o Insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. Replace with a new card, or format the card. o Press to select POWER OFF, and press . Replace it with a new one. o Format the card. Press to select FORMAT, and press to display the confirmation screen. Select YES and press . Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. 25