Panasonic AG-HMX100 Operating Instructions

Panasonic AG-HMX100 Manual

Get Panasonic AG-HMX100 PDF manuals and user guides View all Panasonic AG-HMX100 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AG-HMX100 manual content summary:

  • Panasonic AG-HMX100 | Operating Instructions - Page 1
    Instructions Vol.1 1 Volume Digital AV Mixer Model No. AG-HMX100P Model No. AG-HMX100E Note that Operating Instructions Vol. 1 describes basic operations of the digital AV mixer. For instructions on advanced operations of the digital AV mixer, refer to Operating Instructions Vol. 2 (pdf
  • Panasonic AG-HMX100 | Operating Instructions - Page 2
    Read this first! (For AG-HMX100P) WARNING: This equipment must be grounded. To ensure safe operation, the three-pin plug Canada. Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for
  • Panasonic AG-HMX100 | Operating Instructions - Page 3
    AG-HMX100P) (continued) IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions periods of time. S3125A 14) R efer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
  • Panasonic AG-HMX100 | Operating Instructions - Page 4
    AG-HMX100P Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ07094 Support contact: 1-800-524-1448 This device complies with Part 15 of the FCC Rules. Operation the equipment off and on, the user is encouraged to try to correct the
  • Panasonic AG-HMX100 | Operating Instructions - Page 5
    Read this first! (For AG-HMX100E) WARNING: This equipment must be earthed. To ensure safe operation, the three-pin plug must . No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION: The mains plug of the power supply cord shall remain readily operable. The AC
  • Panasonic AG-HMX100 | Operating Instructions - Page 6
    Read this first! (For AG-HMX100E) (continued) Caution for AC Mains Lead FOR YOUR SAFETY until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. 2.Replace the fuse. Fuse indicates safety information. EEE Yönetmeliğine Uygundur. EEE
  • Panasonic AG-HMX100 | Operating Instructions - Page 7
    high-frequency applications, for SDI (Serial Digital Interface). Coaxial cables, which are designed for 75-ohm type high-frequency applications, are recommended for analog video signals. • Audio signal connecting cables If your apparatus supports AES/EBU serial digital audio signals, use cables
  • Panasonic AG-HMX100 | Operating Instructions - Page 8
    Transition 35 Keying 35 Downstream Key (DSK 36 Fade 38 Before Calling for Service 39 Troubleshooting 39 Specifications 40 Signal Format Supported on the Unit 42 Signal Format Supported on the Unit in 3D Mode... 43 Index 44 Volume 2 (CD) Chapter 1 Applying Effects to Video and Sound
  • Panasonic AG-HMX100 | Operating Instructions - Page 9
    . These phenomena are normal. • The response speed, brightness, and color contrast of the liquid crystal parts vary with the operating temperature and viewing angle. • Operate the CONTRAST control to get the clear display when necessary. Do not give any vibration, impact, or static electricity to
  • Panasonic AG-HMX100 | Operating Instructions - Page 10
    Panasonic AG-HMX100P/HMX100E is an HD/SD-compatible digital Audio Visual mixer equipped with the essential functions of video switchers, digital video effectors, and audio mixers. Features Video switching/combining effects Video can be processed with wipe, mix, chroma key, luminance key, and digital
  • Panasonic AG-HMX100 | Operating Instructions - Page 11
    Functions The following shows the operation examples for video production with the AV mixer functions. Basic Operation (see "Operation Manual Volume 1 ") Applied Operation (see the pdf manual in the CD-ROM, "Operation Manual Volume 2 ") Configuring a system ( page 16) Starting the unit ( page
  • Panasonic AG-HMX100 | Operating Instructions - Page 12
    Overview Accessories Power cable ×1 for AG-HMX100P, ×2 for AG-HMX100E CD-ROM ×1  NOTE • Be sure to appropriately dispose of the packing material when you have unpacked the product. • Consult your supplier regarding purchase of accessories. 12
  • Panasonic AG-HMX100 | Operating Instructions - Page 13
    page 38) 14 Numeric key area • Numeric (0 to 9) keys ( pages 35, 37, 38, Vol.2-6, Vol.2-9, Vol.2-20) • − (minus) key ( pages 35, Vol.2-20) • + (plus) key ( pages 35, Vol.2-20) *1 ME: M and E stand for Mix and Effect, respectively. This function is used to mix or switch two inputs of A and B. 13
  • Panasonic AG-HMX100 | Operating Instructions - Page 14
    , 33, Vol.2-4, Vol.2-9, Vol.2-10, Vol.2-13, Vol.2-15) • (confirm) key*2 15 MASTER fader ( page 33) 16 MIC fader ( page 27, 28, 33) 17 AUX fader ( page 27, 28, 33) 18 SOURCE 1/5, 2/6, 3/7, 4/8 faders ( page 27) 19 AUDIO EFFECTS execution button ( page Vol.2-17) AUDIO FOLLOW VIDEO button ( pages
  • Panasonic AG-HMX100 | Operating Instructions - Page 15
    function applied are input to the HDMI IN, DVI-I IN or VIDEO IN connector, neither image nor sound is output (a black image appears). 1 2 3 4 5 67 8 9 DVI-I IN IN 1 SDI IN 1 2 3 4 PGM DVI-D OUT MULTI VIEW IN 2 SDI OUT MIC PGM PVW AUX MULTI VIEW PHONES VIDEO IN G/L ADV-REF
  • Panasonic AG-HMX100 | Operating Instructions - Page 16
    SDI output AG-HMX100P/HMX100E SDI OUT PGM Multi- view Professional-use output monitor Termination SDI (video and audio) input SDI IN 2 SDI IN 3 SDI IN 4 P2 mobile Composite input VIDEO IN 1 VIDEO IN 2 Composite input Professional-use video camera MIC AUDIO IN MIC input SDI OUT PVW SDI
  • Panasonic AG-HMX100 | Operating Instructions - Page 17
    mobile SDI (video and audio) input SDI IN 2 SDI IN 3 SDI IN 4 HDMI IN 1 HDMI IN 2 HDMI input HDMI input Home-use video camera AG-HMX100P/HMX100E SDI output SDI OUT PGM Multi- view Professional-use output monitor SDI OUT PVW SDI OUT MULTI VIEW SDI OUT AUX Program output AUX output DVI
  • Panasonic AG-HMX100 | Operating Instructions - Page 18
    SDI (video and audio) input SDI IN 2 SDI IN 3 SDI IN 4 HDMI IN 1 HDMI input HDMI IN 2 Home-use video camera HDMI input AG-HMX100P/HMX100E SDI output Multiview Professional-use SDI OUT PGM output LCD monitor SDI OUT PVW SDI OUT MULTI VIEW SDI OUT AUX AUX output Program output DVI
  • Panasonic AG-HMX100 | Operating Instructions - Page 19
    the audio fader ( page 27) • Setting the back matte video ( page 29) • Outputting the color bars ( page 30) • Setting still pictures or movies ( page 30) • Setting video created on PC ( page 32) HD/SD Settings This unit is not available for mixing different formats of input signals. Thus
  • Panasonic AG-HMX100 | Operating Instructions - Page 20
    of the HDMI IN 2 connector is in unavailable format. Change the system format setting or the input source setting.  NOTE The "FAN STOP" error message is also displayed on the multi-view screen. However, since the multi-view screen does not open when this unit is in 3D mode ( page Vol.2-25), no
  • Panasonic AG-HMX100 | Operating Instructions - Page 21
    key/fade ( page Vol.2‑11) [AUDIO EFFECTS] Setting audio effects ( page Vol.2‑17) [COLOR EFFECTS] Setting color effects ( page Vol.2‑13) [VIDEO EFFECTS] Setting video effects ( page Vol.2‑13) [LUMINANCE KEY] Setting the luminance key ( page Vol.2‑7) [CHROMA KEY] Setting the chroma key
  • Panasonic AG-HMX100 | Operating Instructions - Page 22
    Operation) Screen When the SETUP button is pressed, the [SETUP] menu screen appears as shown below. The [SETUP] menu is used to make the basic settings for the entire unit. POS. X 128 Y 128 Z 196 EVENT ME TIME 00 E 01:00 F SETUP PATTERN 3021 INT WHT MODE POWER RESET AUDIO INPUT VIDEO SETUP
  • Panasonic AG-HMX100 | Operating Instructions - Page 23
    "List of Transition Patterns" and "List of Key Patterns" at the back of Volume 2.  NOTE • If the pattern corresponding selected pattern on the monitor connected to the SDI OUT PVW connector. 6 Press the key. The display returns to the [SETUP] Vol.2-3). 4 Enter the number of the pattern you want to
  • Panasonic AG-HMX100 | Operating Instructions - Page 24
    the SHIFT key. The display returns to the [SETUP] menu screen. Audio/Video Input Source Setting screen Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 1 V S-1 SDI A S-1 SDI 2 V S-2 SDI A S-2 SDI 3 V S-3 SDI A S-3 SDI 4 V S-4 SDI A S-4 SDI 5 V S-1 HDMI A S-1 HDMI 6 V S-2 HDMI A S-2 HDMI
  • Panasonic AG-HMX100 | Operating Instructions - Page 25
    one of the audio [SDI], [HDMI], and [ANALOG] (SDI input, HDMI input, and analog input) as the audio input sources [A S-1] to [A S-4] using the rotary 5 control.  NOTE • If the system format is set to SD ( page 19), [HDMI] cannot be selected. If the system format is set to HD, [VIDEO] cannot be
  • Panasonic AG-HMX100 | Operating Instructions - Page 26
    SDI OUT connectors can output the input source as is regardless of the [AUDIO VIDEO] settings. Operate the rotary 4 control to select the input terminal to which the source you want to output is connected. If [PGM], [PVW], or [M VIEW] is selected, the same source as that of the PGM, PVW, or MULTI
  • Panasonic AG-HMX100 | Operating Instructions - Page 27
    inputs 1 to 4 to the L channel or R channel.  NOTE The set channel is stored in memory separately between the cases in which the system format is SD and HD ( page 19), and is called according to the format when the system format is changed. To hide the audio level meter during multi-view output
  • Panasonic AG-HMX100 | Operating Instructions - Page 28
    source R channel of AUX (or MIC) input source*1 *1 To adjust the audio level of the microphone, operate the fader while holding down the SHIFT key. [INT VIDEO] Menu (Internal Video Setting) Screen When the INT VIDEO button is pressed, the [INT VIDEO] menu screen appears as shown below. This menu
  • Panasonic AG-HMX100 | Operating Instructions - Page 29
    Basic Operation Use the rotary 1 control to set the internal video output type to back matte video ([BACK MATTE]) or color bar output ([COLOR BAR]). If [MEMORY] is selected, an external video input source can be saved in internal memory and used as internal video ( page 30). Setting the Back
  • Panasonic AG-HMX100 | Operating Instructions - Page 30
    to using the back matte video ( page 29) and color bar output ( the previous section) built in this unit, it is possible to store external video input sources in internal memory and create still pictures and movies. Created still pictures and movies are saved with oneframe video as one page. The
  • Panasonic AG-HMX100 | Operating Instructions - Page 31
    The page number selected in Step 1 will specify the start frame of the movie. picture appears, press the key. 7 The program output video is created and saved as a Press the A/PROG INT (or B/PRESET INT) still picture with the page number selected in Step 1. button to switch the display source to
  • Panasonic AG-HMX100 | Operating Instructions - Page 32
    , press the . (period) key while holding the SHIFT key again. Using Video Input from PC [PC1] Video can be input from PC to this unit via the DVI-I IN connector. For using video created on PC, it is necessary to allocate the DVI-I input to an input source number in the [AUDIO VIDEO] submenu of the
  • Panasonic AG-HMX100 | Operating Instructions - Page 33
    SHIFT key. Operate the AUX fader to adjust the AUX input level and the MIC fader to adjust the MIC input level. Settings for audio input sources are made from the [AUDIO VIDEO], [AUDIO CH], and [AUDIO FADER] submenus of the [SETUP] menu ( pages 24 and 27). The audio level of the program output is
  • Panasonic AG-HMX100 | Operating Instructions - Page 34
    Operation  NOTE If the AUDIO FOLLOW VIDEO button has been pressed to turn on to interlock the audio faders with the transition lever or the audio level of input source 5 to 8 has been adjusted with the SHIFT key pressed, the audio fader settings may not match the actual audio Vol.2-3). of Volume
  • Panasonic AG-HMX100 | Operating Instructions - Page 35
    button flashes. Keying Keying is a combining effect of adding source video B as a "key" to source video A, and vice versa. The keying methods included the basic pattern key ( page Vol.2-5), chroma key ( page Vol.2-6) , luminance key ( page Vol.2-7), and title key ( page Vol.2-8). The following
  • Panasonic AG-HMX100 | Operating Instructions - Page 36
    Basic Operation For luminance keying, chroma keying or To use the Scene Grabber function external keying, apply effects such as slice and Press the SCENE GRABBER button to turn on. slope to the key video ( page Vol.2-6). The scene grabber function allows you to move the image currently being
  • Panasonic AG-HMX100 | Operating Instructions - Page 37
    Basic Operation The following figure shows an example connection of source equipment, PC, and this unit. P2 mobile Professional-use camera SDI (video and audio) input SDI IN 3 SDI IN 4 AG-HMX100P/HMX100E DVI-I IN DVI-I input HMX100 PC To execute DSK DSK is executed with the DSK execution button
  • Panasonic AG-HMX100 | Operating Instructions - Page 38
    audio faders to the transition lever Press the AUDIO FOLLOW VIDEO keys or using the TIME rotary control. Example: To set "2:05" (2 seconds 5 frames), enter "2.5." The [SYSTEM1] submenu of the [SETUP] menu can be used to select the transition time display form "seconds+frames" or "frames" ( page Vol
  • Panasonic AG-HMX100 | Operating Instructions - Page 39
    Service Troubleshooting Contact your dealer if the problem persists even when you have checked the following items. AG-HMX100P/HMX100E-related problems Problem What to Check • The power cannot be switched on. Is the plug of the power cable inserted properly in the outlet? • There is no picture
  • Panasonic AG-HMX100 | Operating Instructions - Page 40
    23.98PsF (for 3D video only) 10 bits 4 : 2 : 2 : 4 12 bits [AUDIO] Sampling frequency: Quantization: Frequency response: Dynamic range: Distortion: Cross talk: Headroom: 48 kHz (digital input synchronizes with video signal) Analog input: 20 bits, SDI input: 24 bits, HDMI input: 16 bits -1.0 dB to
  • Panasonic AG-HMX100 | Operating Instructions - Page 41
    OUTPUT] Analog composite input (VIDEO IN): SDI input: HDMI input: DVI-I input: External sync signal input (G/L): Program (PGM) output: Preview (PVW) output: AUX output: MULTI VIEW output: Advanced reference output (ADV-REF): BNC x 2 sets, 1.0 V[p-p], 75 Ω termination BNC x 4 sets SD serial digital
  • Panasonic AG-HMX100 | Operating Instructions - Page 42
    ×1080(60Hz) VIDEO SDI - - - - - - - - - - - - HDMI Yes *1 - - - - - DVI-D - - - - - - DVI-I - Yes Yes Yes Yes Yes *1 If [HDMI] is selected, the HDMI input signal is output as is from the DVI-D OUT connector, disabling the AV mixer functions including video switching effects. 42
  • Panasonic AG-HMX100 | Operating Instructions - Page 43
    Specifications Signal Format Supported on the Unit in 3D Mode Format VIDEO SDI NTSC - - PAL - - 480/59.94i - - 480/59.94p HDMI DVI-D DVI-I Inrush current, measured according to European standard EN55103-1: 15 A Mass and dimensions are approximate values. Specifications are
  • Panasonic AG-HMX100 | Operating Instructions - Page 44
    , 16-18, 22, 23, 24 MULTI VIEW connector 15 PGM connector 15 DVI-I IN connector 15, 16-18, 32, 28 Input sources, selecting 32 E Effects 3 Video switching/combining 3 [EFFECTS 4, 5, 7, 8, 9 44 Bold and italicized page numbers (00) indicate pages in Volume 1, while the other page numbers (00
  • Panasonic AG-HMX100 | Operating Instructions - Page 45
    operations 19 G [GEN LOCK 28 G/L connector 15, 16-18, 24, 28 GND terminal 15 GPI connector 15, 26 GPI control of video effects 26 Gradation 29 H HDMI IN 1, 2 connectors 15, 17, 18 HD video processing system configuration 17 HOLD button 13, 34, 36 Hours meter 26 I Initial setup 19 Input
  • Panasonic AG-HMX100 | Operating Instructions - Page 46
    23, 24 SDI OUT connectors 15, 16-18, 22, 23, 24 AUX connector 15 MULTI VIEW connector 15 PGM connector 15 PVW connector 15, 33 SD video processing system configuration 16 Setting screen 20 Setup 22 Operation screen 22 SETUP button 13, 22 [SETUP] menu 22, 26 Shadow (SHADOW 4 SHIFT key 14
  • Panasonic AG-HMX100 | Operating Instructions - Page 47
    MEMO 47
  • Panasonic AG-HMX100 | Operating Instructions - Page 48
    with national legislation. For business users in the European Union If you Panasonic Corporation Web Site: http://panasonic.net Panasonic Solutions Company 3 Panasonic Way, Secaucus, NJ 07094 Tel: 877-803-8492 www.panasonic.com/broadcast e-mail: [email protected] Panasonic
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
VQT2U23
ENGLISH
SS0810RI0 -PS
D
Printed in Japan
Operating Instructions
Vol.1
Digital AV Mixer
Model No.
AG-HMX100P
Model No.
AG-HMX100E
Volume
1
Note that Operating Instructions Vol. 1 describes basic
operations of the digital AV mixer.
For instructions on advanced operations of the digital
AV mixer, refer to Operating Instructions Vol. 2 (pdf file)
contained in the supplied CD-ROM.
Before operating this product, please read the instructions carefully and save this manual for future use.