Panasonic AG-HMX100 Operating Instructions - Page 42
Signal Format Supported on the Unit - video mixer
View all Panasonic AG-HMX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Specifications [OTHER] TALLY output : GPI input: RS-232C : D-sub 9-pin, 8 cross points, open-collector Maximum current: 50 mA or less Maximum voltage: 35 V DC BNC x 1, make-contact D-sub 9-pin Signal Format Supported on the Unit Format NTSC VIDEO SDI Yes - PAL Yes - 480/59.94i - Yes 480/59.94p - - 576/50i - Yes 576/50p - - 720/50p - Yes 720/59.94p - Yes 1035/59.94i *1 - Yes 1080/25p over 50i - Yes 1080/29.97p over 59.94i - Yes 1080/50i - Yes 1080/59.94i - Yes HDMI - - - Yes - - Yes Yes - - - Yes Yes DVI-D - - Yes - Yes - Yes Yes - - - Yes Yes DVI-I *1 Treated as 1080/59.94i Format 640×480(60Hz) 1024×768(60Hz) 1280×768(60Hz) 1280×1024(60Hz) 1920×1080(50Hz) 1920×1080(60Hz) VIDEO SDI - - - - - - - - - - - - HDMI Yes *1 - - - - - DVI-D - - - - - - DVI-I - Yes Yes Yes Yes Yes *1 If [HDMI] is selected, the HDMI input signal is output as is from the DVI-D OUT connector, disabling the AV mixer functions including video switching effects. 42