Panasonic AG-HMX100 Operating Instructions - Page 28

Basic Operation To set the audio output format and the operation of audio faders Set [SOURCE] to [CP PAIR], [BUS SEP1], [BUS SEP2], [12 PAIR], or [12 SEPA.] using the rotary 2 control. The following table shows the output method and audio input sources assigned to the faders for each setting. Setting CP PAIR BUS SEP1 BUS SEP2 12 PAIR 12 SEPA. Output Method Sound output of the selected input source When AB bus system is selected When Program/ Preset system is selected Fixed to sound of input sources 1 and 2. SOURCE 1/5 Fader SOURCE 2/6 Fader SOURCE 3/7 Fader L and R channels of source L and R channels of source L and R channels of source 1 (or 5) 2 (or 6) 3 (or 7) L channel of A/PROG source R channel of A/PROG source L channel of B/PRESET source L channel of A bus source R channel of A bus source L channel of B bus source Preview button lighted: L channel of PROG source Preview button flashing: L channel of PRESET source Preview button lighted: R channel of PROG source Preview button flashing: R channel of PRESET source Preview button lighted: L channel of PRESET source Preview button flashing: L channel of PROG source L and R channel of source 1 L and R channel of source 2 Not available L channel of source 1 R channel of source 1 L channel of source 2 SOURCE 4/8 Fader L and R channels of source 4 (or 8) R channel of B/PRESET source R channel of B bus source Preview button lighted: R channel of PRESET source Preview button flashing: R channel of PROG source Not available R channel of source 2 To set the operation of AUX and MIC faders Set [AUX/MIC] to [PAIR] or [SEPA.] (separate) using the rotary 3 control. The operation of each fader varies with the setting as described in the table shown below. Setting PAIR SEPA. AUX fader L and R channels of AUX input source L channel of AUX (or MIC) input source*1 MIC fader L and R channels of MIC input source R channel of AUX (or MIC) input source*1 *1 To adjust the audio level of the microphone, operate the fader while holding down the SHIFT key. [INT VIDEO] Menu (Internal Video Setting) Screen When the INT VIDEO button is pressed, the [INT VIDEO] menu screen appears as shown below. This menu is used to set the internal video signal built in this unit. During color setting in the [INT VIDEO] menu, the joystick and rotary Z control are in the color setting mode. The color set from this menu is indicated in the internal video display area. WHT YELW CYAN GREN MGT RED BLUE BLK CST 1 CST 2 CL BR ST # *1 MV # *1 WASH PB 128 PR 128 Y 196 EVENT ME TIME 00 E 1:00 F INT VIDEO PATTERN INT 3001 BLUE GRADE POS 80 BACK COLOR LEVEL PATTERN GRADE MATTE WHITE 255 H1 0 COLOR BAR MEMORY PAGE FRAME MODE 1 2 FRAME WRITE *1 # stands for a numeric value. (The maximum value varies with the memory size (the number of frames) set in the [MEMORY] submenu of the [SETUP] menu.) 28