Panasonic AG-HMX100 Operating Instructions-Advanced - Page 12

Chapter 1 Applying Effects to Video and Sound The slope is set to specify the luminance level range of the area to be removed. The setting value can be increased to remove only the area of the luminance level closest to the specified level. Set [REVERSE] (reversing the key signal) to [ON] or [OFF] using the rotary 4 control. The factory default setting is [OFF]. Set [K LEVEL] (transparency level of the key) in the range of [0] to [255] using the rotary 5 control. The factory default setting is [255]. [CROP] Settings can be made in the same way as in the [CROP] submenu of the [PATTERN KEY] menu ( page 5). DSK slide on/off [DSK ON/OFF] The direction and time of the slide in/out operation can be set for executing the downstream key. [SLIDE I.] and [SLIDE O.] are effective if [KEY] is set to [TITLE] in the [DSK SOURCE] submenu. Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 DSK ME TRIG SLIDE I. SLIDE O. SPEED ON/OFF OFF OFF OFF 8 OFF OFF OFF 2-64 ON Setting the Fade [FADE] The [DSK FADE] menu is used to set the fade effect ( page 11). Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 FADE TO AUDIO PHONE BLACK ON AFTER BLACK ON WHITE OFF BLUE AFTER PRE Select the video color after fading from [BLACK], [WHITE], and [BLUE] using the rotary 2 control. The factory default setting is [BLACK]. Set [AUDIO] (sound fading) to [ON] or [OFF] using the rotary 3 control. The factory default setting is [ON]. Set [PHONE] (fading of headphones output) to [AFTER] or [PRE] using the rotary 4 control. [AFTER] generates sound with fade applied, while [PRE] generates sound without fade. The factory default setting is [AFTER]. Operate the rotary 2 control to set whether or not to execute downstream key additionally during auto transition executed with the AUTO TAKE button. The factory default setting is [OFF]. Operate the rotary 3 control to set the direction of the slide in operation when DSK is ON. The factory default setting is [OFF]. Operate the rotary 4 control to set the direction of the slide out operation when DSK is ON. w: Sliding toward the left q: Sliding toward the right e: Sliding toward the top r: Sliding toward the bottom The factory default setting is [OFF]. Operate the rotary 5 control to set the sliding speed. Select an even number in the range of [2] to [64]. The factory default setting is [8]. [DSK EFFECTS] Settings can be made in the same way as in the [EFFECTS] submenu of the [TRANSITION] menu ( page 4). 12