Panasonic AG-HMX100 Operating Instructions-Advanced - Page 17
Setting Audio Effects, [AUDIO EFFECTS] Menu
View all Panasonic AG-HMX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 1 Applying Effects to Video and Sound Setting Audio Effects The [AUDIO EFFECTS] menu is used to process sound. Audio effects can be set for each input source. To execute the audio effects Press the AUDIO EFFECTS execution button. The AUDIO FOLLOW VIDEO button can be pressed to turn on to link the video effects and the audio effects during execution of transition or fade. [AUDIO EFFECTS] Menu The menu appears when the AUDIO EFFECTS button is pressed. POS. X 128 Y 128 Z 512 1 - 8 EVENT ME TIME PATTERN INT AUX 00 E 02:00 F 0056 WHT AUDIO EFFECTS PAN IN CH BALANCE OFF L 0 EQ L LEVEL H LEVEL 1 ON 0 0 EQ M LEVEL FREQ Q MID 0 1.01kHZ 0.5 VOICE CHANGE PITCH LEVEL OFF UP 5 MUTE OFF AB Scroll the screen to display. Select the input source using the rotary 1 control. [1] to [8]: Input sources 1 to 8 [AUX]: AUX input Select the effect to set using the rotary 2 control. [PAN] [PAN] is set to change the audio balance between left and right. Rotary 2 Rotary 3 Rotary 4 Rotary 5 PAN IN CH BALANCE OFF L 0 OFF L L7 ON R L6 L+R L1 0 R1 R2 R7 Select [ON] or [OFF] to specify whether or not to apply the effect using the rotary 3 control. The factory default setting is [OFF]. Set [IN.CH] to [L], [R], or [L+R] using the rotary 4 control. [IN.CH] is used to select the channel to be emphasized. L: Left channel R: Right channel L+R: Both left and right channels The factory default setting is [L]. Set [BALANCE] in the range of L7 to 0 and 0 to R7 using the rotary 5 control. [BALANCE] is used to select whether to expose the channel selected with [IN.CH] toward the right direction (R) or left direction (L) and to set the gap from the center position using a numeric value. The factory default setting is 0 (center). [EQ] [EQ MID] is used to adjust the high-range or mid-range audio level and set equalizer effects. Rotary 2 Rotary 3 Rotary 4 Rotary 5 EQ L LEVEL H LEVEL ON 0 0 OFF -14dB - 14dB -14dB - 14dB ON Select [ON] or [OFF] to specify whether or not to apply all equalizer effects using the rotary 3 control. The factory default setting is [ON]. Set the [L LEVEL] (low-range level in dB) in the range of [-14dB] to [14dB] in 2 dB steps using the rotary 4 control. The factory default setting is [0]. Set the [H LEVEL] (high-range level in dB) in the range of [-14dB] to [14dB] in 2 dB steps using the rotary 5 control. The factory default setting is [0]. [EQ MID] Rotary 2 Rotary 3 Rotary 4 Rotary 5 EQ M LEVEL FREQ Q MID 0 1.01kHz 0.5 -14dB - 14dB 100Hz-10.2kHz 0.5 1 2 5 Set the [M LEVEL] (mid-range level in dB) in the range of [-14dB] to [14dB] in 2 dB steps using the rotary 3 control. The factory default setting is [0]. Set the [FREQ] (Frequency to be emphasized) in the range of [100Hz] to [10.2kHz] using the rotary 4 control. The factory default setting is [1.01kHz]. 17