Panasonic AG-HMX100 Operating Instructions-Advanced - Page 23

Chapter 3 Switching 3D Video System for Displaying Program Output and Multi-view Output on Different Monitors (Use of SIDE BY SIDE Signal) SDI input 1 and SDI input 2 are paired to be used as L-channel and R-channel input sources, respectively. SDI input 3 and SDI input 4 are paired to be used as L-channel and R-channel input sources, respectively. The output is the SIDE BY SIDE signal to be transferred as a single-channel signal generated by compression of L-channel and R-channel signals in the horizontal direction. Program output and multi-view output are the same signal. 3D mode is set to [MODE2] ( page 25). Advanced reference signal*1 Program output Professional-use 3D monitor L R Professional-use 3D-integrated camera SDI (video and audio) input ADV-REF SDI IN 1 SDI IN 2 L-channel side SDI IN 3 SDI output SDI OUT PGM Multi-view output SDI OUT MULTI VIEW P2 mobile Program output DVI-D OUT PGM Professional-use camera Loopthrough SDI IN 4 Termination Professional-use camera R-channel side AG-HMX100P/HMX100E Multi-view output DVI-D OUT MULTI VIEW DVI-D output Home-use monitor Professional-use monitor *1 Advanced reference signal need not necessarily be connected. 23