Panasonic AG-HMX100 Operating Instructions-Advanced - Page 20
Event Memory Operation, Registering the Current Settings and Created Effects as Events, Calling Events
View all Panasonic AG-HMX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 Registering Settings and Effects Event Memory Operation The EVENT SET and EVENT RECALL buttons are used to register and call events, respectively. The currently selected event number is shown in the event number display area of the setting screen. [E] is shown for a null event. EVENT 00E Registering the Current Settings and Created Effects as Events 1 Press the EVENT SET button. The button is lighted. 2 Select the event number in the range of 0 to 99. Enter the number using the numeric keys or increment or decrement the value using the + or - key, respectively. 3 To call the settings, press the key. The EVENT RECALL button goes off. The selected event is called and the settings of the setting screen are changed to those registered as the event. 4 Press the AUTO TAKE button. The effects registered as the event are executed. If one of the events in which a series of effects were registered is called If 10 events are consecutively registered with event numbers in the range of 50 to 59, 60 to 69, 70 to 79, 80 to 89, or 90 to 99, the settings of the first event are reproduced when one of the 10 events is called. NOTE When the event is called, the settings of the input source used during creation of the effects are not reproduced. The effects are executed with the currently available input source settings. Thus, first reproduce the same input source settings as those during effect creation, and then call the event to execute. 3 Press the key. The EVENT SET button flashes for approximately 2 seconds, and then goes off. To register a series of effects as events Up to 10 effects can be consecutively registered as events with numbers 50 to 59, 60 to 69, 70 to 79, 80 to 89, or 90 to 99. Since those 10 events can be called and executed consecutively, the key frame settings can also be registered as events. Clearing Event Memory 1 Press the EVENT RECALL button. The button is lighted. 2 Select the event number. Enter the number using the numeric keys or increment or decrement the value using the + or - key, respectively. Calling Events 1 Press the EVENT RECALL button. The button is lighted. 3 Press the key while holding down the SHIFT key. The EVENT RECALL button goes off. The memory of the selected event is cleared. 2 Select the event number. Enter the number using the numeric keys or increment or decrement the value using the + or - key, respectively. 20