Panasonic AG-HMX100 Operating Instructions-Advanced - Page 14

Chapter 1 Applying Effects to Video and Sound POS. X 128 Y 128 Z 196 EVENT ME TIME 00 E 01:00 F VIDEO EFFECTS PATTERN 3001 INT WHT CH A MOSAIC DEFOCUS MONO TIME EFFECTS DECAY PAINT NEGA Y MIRROR H SIZE OFF XY 8 LEVEL OFF 2 OFF OFF TIME OFF 16 LEVEL OFF 4 C OFF OFF V OFF OFF Scroll the screen to display. [MOSAIC] The mosaic effect can be applied to input video. The following diagram shows an example of the mosaic effect. [DEFOCUS] The video effect of purposely displacing the focus can be set to perform fantastical rendering or get the attention of viewers. The following diagram shows an example of the defocus effect. Defocus effect Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 DEFOCUS LEVEL OFF 0 OFF 0-7 ON Select [ON] or [OFF] to specify whether or not to apply the effect using the rotary 2 control. The factory default setting is [OFF]. Set [LEVEL] in the range of 0 to 7 using the rotary 3 control. The factory default setting is 2. This level setting is applied to No. 1004 (203) transition pattern. This effect cannot be activated with any twodimensionally compressed pattern at the same time.  NOTE Either mosaic or defocus can be selected. Whichever is selected later has priority and the other selected earlier is canceled. Mosaic effect Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 MOSAIC SIZE OFF XY 0 OFF XY ON X Y 0-31 Select [ON] or [OFF] to specify whether or not to apply the effect using the rotary 2 control. The factory default setting is [OFF]. Set the direction of applying the mosaic effect to [XY] (horizontal and vertical), [X] (horizontal only), or [Y] (vertical only) using the rotary 3 control. Set [SIZE] in the range of 0 to 31 using the rotary 4 control. The factory default setting is 8. This size setting is applied to Nos. 1001, 1002, and 1003 (200, 201, and 202) patterns. [MONO] Chroma (color) can be deleted to generate monochrome video. Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5 MONO OFF OFF ON Select [ON] or [OFF] to specify whether or not to apply the effect using the rotary 2 control. The factory default setting is [OFF]. This setting has a priority over the settings made in the [COLOR EFFECTS] menu ( page 13). 14