Panasonic HDC-TM20K8 User Manual - Page 60
Relay recording, Select the menu., Anti-Ground, Shooting AGS, Auto slow shutter
View all Panasonic HDC-TM20K8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Function Relay recording Anti-GroundShooting (AGS) Effect/Setting method It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. ≥ Change the mode to . Select the menu. (l 27) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ It allows to record only to SD card from built-in memory. ≥ Relay recording can only be performed once. ≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE] into the SD card. (l 90) ≥ Once the relay recorded scene and the scene that was recorded on the SD card after that are combined into the SD card using the [RELAY SCENE COMBINE], it will be possible to perform the relay recording again. ≥ If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform relay recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that. If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. ≥ Change the mode to . Select the menu. (l 27) [RECORD SETUP] # [AGS] # [ON] Auto slow shutter You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to . ≥ The intelligent auto mode is set to off. (l 40) Select the menu. (l 27) [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness. 60 VQT2B34