Panasonic PT-D7700U-K Dlp Projector - English/ French - Page 50
Basic Operations On Menu Screen, Returning To The Previous Screen, Menu Items Shown In Gray Characters
UPC - 791871111000
View all Panasonic PT-D7700U-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
On-screen menus Basic operations on menu screen Press the "MENU" button. The MAIN MENU appears on the screen. MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECT ENTER:SUB MENU Select the desired item with the or button. Selected items are displayed in blue. MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECT ENTER:SUB MENU Press the "ENTER" button to establish your selection. The submenu for the selected option will now open. (Example: PICTURE Menu) PICTURE PICTURE MODE COLOR TINT COLOR TEMP. GAMMA CONTRAST BRIGHT SHARPNESS NOISE REDUCTION DYNAMIC IRIS DYNAMIC 50 30 DEFAULT 2.2 32 32 6 2 1 :MENU SELECT :ADJUST Highlight the desired adjustment item with the or button, then change or adjust the parameter value with the or buttons. For the items such as "COLOR", "TINT", "CONTRAST" and "BRIGHT", an individual adjustment screen with an individual bar graph as shown below is displayed by pressing the ENTER button. CONTRAST 32 • If no button is operated for approx. 5 seconds while the individual adjustment screen is displayed, the screen will return to the previous page. 50 Returning to the previous screen • When the "MENU" is on the screen, pressing the "MENU" button returns to the previous page. • When the MAIN MENU is on the screen, pressing the "MENU" button clears all menus from the screen. Menu items shown in gray characters • Some menu items may not be valid for certain signal formats applied to the projector. The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected. Menu items setting The bottom prompt line differs on each menu depending on the selected menu option: • A prompt " CHANGE" appears when changing the setting. • A prompt " ADJUST" appears for a separate bar graph. • When and buttons are displayed above or under the items in the "OPTION" screen, they indicate that there are more adjustment (items). Resetting to the factory default STD (standard) button is used to reset all of the projector adjustment values to the default levels which were set at the time of shipment from the factory. It is pressed after the respective adjustment mode screen has been displayed. • When the Menu screen is displayed: A "STD" indicator appears on the upper right corner of the menu. PICTURE PICTURE MODE COLOR TINT COLOR TEMP. GAMMA CONTRAST BRIGHT SHARPNESS NOISE REDUCTION DYNAMIC IRIS :MENU SELECT :ADJUST DYNAMIC 50 30 DEFAULT 2.2 32 32 6 2 1 STD