Panasonic PT-D7700U-K Dlp Projector - English/ French - Page 61
How To Use Advanced Menu, Digital Cinema Reality, Format (to Input Betacam With Ycbcr 480i)
UPC - 791871111000
View all Panasonic PT-D7700U-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
How to use ADVANCED MENU DIGITAL CINEMA REALITY Increase the vertical resolution when the PAL (or SECAM) 576i signal input or the NTSC 480i signal input is applied. Procedure of adjustment MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION Press the "MENU" button. The MAIN MENU screen will be displayed. Select "ADVANCED MENU" with the buttons. ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION Press "ENTER" button. The ADVANCED MENU screen will be displayed. Select "DIGITAL CINEMA REALITY" with the buttons. OFF: Unforced cinema processing AUTO: Performs automatic detection and cinema processing. (factory default) 30p FIXED: Forced cinema processing (2:2 pulldown) is performed when a 480i signal is input. 25p FIXED: Forced cinema processing (2:2 pulldown) is performed when a 576i signal is input. Note • In DIGITAL CINEMA REALITY mode, the image quality will be deteriorated if 30p FIXED or 25p FIXED is selected when the signal is not a 2:2 pulldown signal. FORMAT (To input BETACAM with YCbCr 480i) When receiving a picture of 480i with analog component signal YCbCr input, the input level of Cb and Cr can be switched. Procedure of adjustment MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECT :CHANGE Press the "MENU" button. The MAIN MENU screen will be displayed. Select "ADVANCED MENU" with the buttons. Press "ENTER" button. The ADVANCED MENU screen will be displayed. Select "FORMAT" with the buttons. Switch the signal format with the buttons. • This toggles between SMPTE and BETACAM. Format Y SMPTE 700 mV BETACAM 714 mV Synchronous part 300 mV 286 mV Cb , Cr ±350 mV ±504 mV Note • This function is available only when input signals are supplied through the analog RGB input module (ET-MD95RGB). RGB1, RGB2 inputs do not support BETACAM signals. • This function can be switched only when receiving the picture of 480i in the YCbCr mode. It cannot be switched when receiving the picture of signals other than RGB-REALITY mode, RGB mode and 480i. • SMPTE is the factory default. 61