Pioneer AVH-P4400BH Owner's Manual - Page 70
Touch Auto EQ Measurement to enter - error 10
View all Pioneer AVH-P4400BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Section 15 Menu operations 4 Display the system menu. Refer to Introduction of menu operations on page 57. 5 Touch Auto EQ Measurement to enter auto EQ measurement mode. 6 Plug the microphone into the microphone input jack on this unit. (AVH-P3400BH/AVH-P2400BT/AVHP1400DVD) 9 Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. 10 Press h(eject) to close the panel. (AVH-P4400BH only) (AVH-P4400BH) 7 Touch Start to start auto EQ. 8 When the 10-second countdown starts, get out of the car and close the door within 10 seconds. A measurement tone (noise) is emitted from the speakers, and auto EQ measurement begins. When auto EQ is completed, Complete is displayed. When the car's interior acoustic characteristics cannot be measured correctly, an error message will be displayed. (Refer to Understanding auto EQ error messages on page 96.) # It takes about nine minutes for auto EQ measurement to be completed when all the speakers are connected. # To stop auto EQ, touch Stop. 70 En