Pioneer DEH-P710BT Owner's Manual - Page 43
Introduction of audio, adjustments, Using balance adjustment, Using the equalizer, Audio Adjustments
UPC - 012562943534
View all Pioneer DEH-P710BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Audio Adjustments Section 10 English Introduction of audio adjustments 1 1 Audio display Shows the audio adjustment status. 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to select. The audio menu is displayed. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. Fader (balance adjustment)-Powerful (graphic equalizer adjustment)-50Hz (7-band graphic equalizer adjustment)-Loudness (loudness)-SubWoofer1 (subwoofer on/off setting)-SubWoofer2 (subwoofer setting)- Bass (bass boost)-HPF (high pass filter)- SLA (source level adjustment)-Guide VOL (voice guidance volume adjustment) # You can select the SubWoofer2 only when subwoofer output is turned on in SubWoofer1. # When selecting FM as the source, you cannot switch to SLA. # If TEL is selected as a source, only Fader (balance adjustment) and Guide VOL (guidance volume) can be operated. # To return to the display of each source, press BAND/ESC/CANCEL. # If you do not operate functions except for 50Hz within about 30 seconds, the display is automatically returned to the ordinary display. Using balance adjustment You can change the fader/balance setting so that it can provide the ideal listening environment in all occupied seats. 1 Display the audio menu. Refer to Introduction of audio adjustments on this page. 2 Use MULTI-CONTROL to select Fader in the audio function menu. # If the balance setting has been previously adjusted, Balance will be displayed. 3 Push MULTI-CONTROL up or down to adjust front/rear speaker balance. Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear. Front 15 to Rear 15 is displayed as the front/ rear speaker balance moves from front to rear. # F/R 0 is the proper setting when only two speakers are used. # When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer output on page 50. 4 Push MULTI-CONTROL left or right to adjust left/right speaker balance. Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves towards the left or right. Left 15 to Rear 15 is displayed as the left/right speaker balance moves from left to right. Using the equalizer The equalizer lets you adjust the equalization to match the car's interior acoustic characteristics as desired. En 43