Samsung BD-E6500 User Manual Ver.1.0 (English) - Page 26
Networks and the Internet, Configuring Your Network Connection
View all Samsung BD-E6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Settings Networks and the Internet When you connect this player to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the player's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 43~47. Instructions for configuring the network connection start below. Configuring Your Network Connection Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below. If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure. If you are connecting to a wireless network, disconnect any wired network connection before you begin. To begin configuring your network connection, follow these steps: 1. In the Home screen, select Settings, and then press the v button. 2. Select Network, and then press the v button. 3. Select Network Settings, and then press the v button. 4. Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 27. Wired Network ĞĞ Wired - Automatic After following Steps 1 to 3 above: 1. Select Start in the Network Settings screen, and then press the v button. The player detects the wired connection, verifies the network connection and then connects to the network. ĞĞ Wired - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. After following Steps 1 to 3 above: 1. Select Start in the Network Settings screen, and then press the v button. The Network Status screen appears. The player attempts to verify the network connection and fails. Network Settings Wired network connection failed. MAC Address IP Address Subnet Mask Gateway DNS Server XX:XX:XX:XX:XX:XX 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Unable to connect to the network. Try the following: - check if your IP address is set correctly in IP Settings. - Contact your Internet Service Provider for more information. Previous IP Settings Retry OK 2. Select IP Settings on the right of the screen, and press the v button. The IP Settings screen appears. 3. Select the IP Mode field, and then set it to Manual. 4. Use the number keypad on your remote to enter the Network values. Use the buttons on the remote to move from entry field to entry field. ||NOTE | \\ You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Setting Values." on page 27. 5. When done, highlight OK, and then press v button. The player verifies the network connection and then connects to the network. | 26 English