Samsung RF34H9960S4 User Manual Ver.0.3 (English, French, Spanish) - Page 56
Optimum Operating Environment For Sparkling Water
View all Samsung RF34H9960S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
OPTIMUM OPERATING ENVIRONMENT FOR SPARKLING WATER Item Descriptions [Water temperature] "We recommend that you only drink sparkling water after it is sufficiently cooled." • Since the temperature of the sparkling water greatly affects the taste of the water, if the temperature of water is not sufficiently low, you may not be able to get the right taste. • We recommend you wait at least four hours after connecting tap water to the refrigerator before making and dispensing sparkling water. • We also recommend that when the refrigerator is producing sparkling water, that you dispense as little regular water as possible so that the sparkling water is produced with cold water. • If you drink 0.5 gallons (2 liters) or more a day, the water may not be cooled sufficiently. • To store dispensed sparkling water, put the water in an air tight container and keep it in a cold section of the refrigerator for better taste. [CO2 concentration of sparkling water 1] "To ensure a precise CO2 concentration, dispense all the remaining sparkling water before producing additional sparkling water." • Because the current system does not measure the CO2 concentration of the sparkling water remaining in the sparkling water tank before it starts to produce additional sparkling water, the resulting concentration may differ from the from the desired level, depending on the remaining sparkling water in the sparkling water tank. • If you haven't used the sparkling water function for an extended period of time (one week or longer), first remove all the sparkling from the sparkling water tank, and then produce fresh sparkling water for better quality and taste. [CO2 concentration of sparkling water 2] "To maintain a precise CO2 concentration of sparkling water, replace the CO2 cylinder before it is depleted." • As the time to replace the SodaStream Carbonator comes closer, the CO2 concentration decreases and sparkling water becomes weaker. • If the SodaStream Carbonator runs out of CO2, the cylinder icon ( ) turns on. If this occurs, replace the SodaStream 60L Carbonator with a new one. [Preparing sparkling water - Capacity] "If you want to have sufficient sparkling water prepared in the morning, we recommend that you touch and hold the Sparkling Maker button for 3 seconds to start the sparkling water production before going to bed." • If you do not press and hold the "Sparkling Maker" button for 3 seconds to start the sparkling water production, the amount of sparkling water in the water tank may be less than the maximum production capacity of 1.1 liters. • Since a production time of 10~30min is required if you need 1.1 liters or more of sparkling water, we recommend producing and storing enough sparkling water in advance or at least securing the maximum sparkling water capacity of 1.1 liter by pressing and holding the "Sparkling Maker" button for 3 seconds to start sparkling water production. DA68-03013A-03.indb 56 English - 56 2014. 2. 25. 4:05