Samsung SCX4521F Service Manual - Page 106
Printed Vertical Lines become curved, Defective motor operation, 3.9 No Power
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting 6.3.8 Defective motor operation • Description Main motor is faulty and paper does not feed into the printer, resulting in Jam 0' Check and Cause 1. The main motor harness or Motor PCB may be faulty. Solution 1. Check the motor harnesses and connectors, replace if defective.. If the problem persists replace the main PBA. Note Check motor operation using Engine Test Mode. 6.3.9 No Power • Description When system power is turned on the LCD panel does not come on. Check and Cause 1. Check if the power input and SMPS output are normal. 2. LCD panel does not come on but normal start up sounds are heard. 3. After replacing SMPS display does not come on and no start up sounds are heard. Solution 1. Replace the power supply cord or SMPS. Check power fuse and SMPS fuses replace if necessary. 2. Replace the OP panel. 3. Replace the main PBA. 6.3.10 Printed Vertical Lines become curved • Description When printing, vertical lines are not straight. Check and Cause 1. Check stability of 24V supply to LSU. Solution 1. 24V stable - Replace LSU. 24V unstable replace SMPS, if the problem persists replace the main PBA. Samsung Electronics Service Manual 6-11