Samsung SCX4521F Service Manual - Page 129
CMOS BIOS setup., Printer Driver Error. - drivers download
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Troubleshooting 6.10.3 Abnormal Printing • Description Printing does not work - even after replacing the cable Printer does not work at all or strange fonts are printed, Check and Cause 1. Set up the parallel port using CMOS SETUP. 2. Printer Driver Error. 3. Error message "insufficient memory". (The printing job sometimes stops due to insufficient virtual memory, this is caused by insufficient space on the hard disk.) Solution 1. Ensure that ECP (best) or SPP is selected in the CMOS (BIOS) setup. 2. Ensure that the correct driver is loaded. Use the driver supplied on the CD or downloaded from the Samsung web site. DO NOT use the Microsoft driver supplied with the Windows operating system. If the printer is a GDI or SPL type printer ensure that ALL OTHER GDI or SPL drivers are uninstalled as Windows allows only 1 of this type of driver to be loaded. 3. Delete any unnecessary files to secure enough space on the hard disk and start the print job again. 6-34 Service Manual Samsung Electronics