Samsung SCX4521F Service Manual - Page 128
Check and Cause, Solution, For the printer port, Select ECP. SPP and normal
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Troubleshooting 6.10.2 The printer is not working (2) • Description After receiving the print command there is no response at all or print speed is low due to wrong setup of the environment rather than malfunction of the printer itself. Check and Cause 1. Ensure you have sufficient free hard disk space for the temporary work files created during printing. 2. Printing error occurs even if there is enough space in the hard disk. 3. Check the parallel-port-related items in the CMOS Setup. 4. Reboot the system to print. Solution 1. Not working with the message 'insufficient printer memory' means there is a hard disk space problem rather than a printer RAM problem. In this case provide more space on the hard disk. Secure more space using the disk utilities program. 2. The connection of the cable and printer port is not correct. Check that the cable is properly connected and if you are using the parallel port check that the port settings in CMOS is correct. 3. For the printer port, Select ECP. SPP and normal normal modes support 8-bit data transfer, while ECP Mode supports 12-bit data transfer. 4. If the regular font is not printing, the cable or the printer driver may be defective. Turn the PC and printer off, and reboot the system to print again. If not solved, double-click the printer in my computer If the regular fonts are not printed this time again. the cable must be defective so replace the cable with new one. Samsung Electronics Service Manual 6-33