Samsung SCX4521F Service Manual - Page 72
Machine Test, SWITCH TEST, MODEM TEST, PATTERN TEST, SHADING TEST, < Method > - scanning software
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Alignment and Adjustments 4.2.5 Machine Test SWITCH TEST Use this feature to test all keys on the operation control panel. The result is displayed on the LCD window each time you press a key. MODEM TEST Use this feature to hear various transmission signals to the telephone line from the modem and to check the modem, amplifier and speaker. If no transmission signal sound is heard, it means the modem part of the main board, amplifier, speaker or speaker harness is faulty. DRAM TEST Use this feature to test the machine's DRAM. The result appears in the LCD display. If all memory is working normally, the LCD shows > ROM TEST Use this feature to test the machine's ROM. The result and the software version appear in the LCD display. • FLASH VER : 1.00 V • ENGINE VER :1.00V PATTERN TEST Using this pattern printout you can check that the printer mechanism is functioning properly. This function is for factory manufacturing use only. SHADING TEST The function is used to set the optimum scan quality determined by the specific characteristics of the CIS(Contact Image Sensor). If copy image quality is poor perform this function to check the condition of the CIS unit. < Method > 1. Select the [Shading Test] in TECH MODE (Menu, #, 1934). 2. Push the ENTER button and an image will be scanned. 3. After scanning the CIS SHADING PROFILE will be print out. 4. If the printed image is different to the sample image shown the CIS is defective. NOTICE : When you test the CIS, make sure that the cover is closed. MAX=229 Min=168 Avg=193 Diff=15 PRNU=6 MAX=234 Min=174 Avg=200 Diff=14 PRNU=7 MAX=241 Min=179 Avg=204 Diff=14 PRNU=4 MAX=240 Min=176 Avg=202 Diff=15 PRNU=6 Samsung Electronics Service Manual 4-12