Samsung SCX4521F Service Manual - Page 36
HVPS Board, Safety Requirement : IEC950 UL1950, CSA950, C-UL, Semko, EK, CB, CIB, GOST, EPA - feed roller
UPC - 635753616040
View all Samsung SCX4521F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
System Overview 4) Power Cord Length : 1830 50mm 5) Power Cord Switch : Exist 6) Feature - Withstand Resistance : 100 or more (at DC 500V) - Insulating revisiting pressure : Must be no problem within 1 min. (at1000Vac,10mA) - Leaking Current : under 3.5mA - Running Current : under 40A PEAK (AT 25 °C,COLDSTART) under 50A PEAK (In other conditions) - Rising Time : within 2Sec - FallingTime : over 20ms - Surge : Ring Wave 6KV-500A (Normal, Common) 7) Environment Condition - Operating temperature range : 0 °C ~ 40 °C - Maintaining temperature range : -20 °C ~ 40 °C - Preserving Humidity Condition : 10% ~ 90% RH - Operating atmospheric pressure range : 1atm 8) EMI Requirement : CISPR, FCC, CE, MIC, 9) Safety Requirement : IEC950 UL1950, CSA950, C-UL, Semko, EK, CB, CCC(CCIB),GOST, EPA, 3.6.2 HVPS Board The HVPS board creates the high voltage of THV/MHV/Supply/Dev and supplies them to the developer part for making best quality printing image. The HVPS part takes the 24V and outputs the high voltage such as THV/MHV/Supply/Dev, and the outputted high voltage is supplied to the toner, OPC cartridge, and transfer roller. (a) Transfer High Voltage (THV+) - Input Voltage : 24 V DC +15% / -10% (21.6V~27.6V) - Out Voltage : +1300KV 1.5% (200 Load ) - Out Voltage Trigger : 6.5 - Input Voltage Variation : 5 % Load Variation : 5 % - Out Voltage Rising Time : 100 ms Max - Out VoltageFalling Time : 100 ms Max - Transfer Variation Voltage on Environment Variation : +500 V ~ +5000V - Control Method on environment : THV-PWM ACTIVE, transfer Active signal, of environment sensing voltage is input and get feed back current, and recalculate it to resistance . - Control method on transfer output voltage : It is controlled by changing its duty of THVPWM Signal as follows. 10% Duty : +500V, 90% Duty : +5000V (b) Charge Voltage (MHV) - Input Voltage : 24 V DC +15% / -10% (21.6V~27.6V) - Out Voltage : -1300KV 50V(50 Load) - Out Voltage Rising Time : 50 ms Max - Out VoltageFalling Time : 50msMax - Out Voltage Range : 30 ~ 1000 - Output Control Signal(MHV-PWM) : Active Low PWM signal for controlling MHV 3-14 Service Manual Samsung Electronics