Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 192

COPIER Load the tab paper. Reverse side When using the bypass tray, place the paper with the print side down. Place the paper so that the sides with the tabs enter the machine last. 4 After loading the tab paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 2-38). The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm). Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 5 have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel tab copy... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Initial Tab Copy Setting The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)". 2-80 Contents