Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 828

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver. If the PPD driver is installed, see "When the PPD driver is installed" (page 24). X When the PCL printer driver or PS printer driver is installed 1 Click the [Start] button ( ), click [Control Panel], and then click [Printer]. • In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. • In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and then click [Printers]. If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel], click [Printers and Other Hardware], and then click [Printers and Faxes]. 3 Click the [Configuration] tab. In Windows 98/Me, click the [Setup] tab and then click the [Configuration] tab in the window that appears. 4 Click the [Auto Configuration] button. The settings are automatically configured based on the detected machine status. 2 Open the printer properties window. (1) Right-click the printer driver icon of the machine. (2) Select [Properties]. If the machine is being used on an IPv6 network, you must configure the options manually as explained in "If automatic configuration fails" (page 23). 22