Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 536

SCANNER/INTERNET FAX CHANGING THE COLOR MODE This procedure is used to change the color mode used to scan the original when the [START] key is pressed. This function cannot be used in Internet fax mode. Mode Full Color Grayscale Mono2 Scanning method The original is scanned in full color. This mode is best for full color originals such as catalogues. The colors in the original are scanned in black and white as shades of gray (grayscale). Colors in the original are scanned as black or white. This mode is best for text-only originals. Select the mode and display the color mode settings screen. 1 (1) Touch the tab of the mode that you wish to use. (2) Touch the [Color Mode] key. ☞ IMAGE SETTINGS (page 5-53) 2 Image will be sent in [Mono2] if Fax or I-Fax destination is included. OK Read the displayed message and touch the [OK] key. A message does not appear in USB memory mode. Go to the next step. When a broadcast transmission is performed using mixed send modes, the image is sent in Mono2. Scan/Color Mode 3 Full Color Grayscale Mono2 OK Select the color mode. (1) Touch the key of the desired color mode. (2) Touch the [OK] key. (1) (2) System Settings (Administrator): Default Color Mode Settings The default color mode can be changed. 5-68 Contents