Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 769

SADDLE STITCH FINISHER Finisher unit TROUBLESHOOTING Open the front cover. 1 While pulling the lever, slide the saddle stitch finisher to the left until it stops. 2 Lower the staple case release lever and remove the staple case. 3 Pull the staple case out to the right. Raise the lever at the front end of the staple case and remove the jammed staple. Remove the leading staple if it is bent. If bent staples remain, a 4 staple jam will occur again. Take care that a bent staple does not hurt you. Lower the lever at the front end of the staple case. 5 8-11 Contents