Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 88

BEFORE USING THE MACHINE FINISHER (LARGE STACKER) The finisher (large stacker) is equipped with the offset function, which offsets each set of output from the previous set, and the staple sort function, which staples each set of output. A punch module can also be installed to punch holes in output. PART NAMES (3) (1) (4) (2) (1) Stapler compiler This temporarily stacks paper to be stapled. (2) Output trays (upper tray, lower tray) Stapled and offset output is delivered to these trays. The trays are slidable. For large-size output (12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", A3W, A3, B4 and 8K sizes), extend the tray. (3) Top cover Open this cover to remove a paper misfeed. (4) Front cover Open this cover to replace the staple cartridge or remove a staple jam. • A paper pass unit is required to install a finisher (large stacker). • Do not place heavy objects on the finisher (large stacker) or press down on the finisher (large stacker). • Use caution when you turn on the power and when printing is taking place, as the output tray may move up and down. • A finisher (large stacker) cannot be installed simultaneously with a saddle stitch finisher or a finisher. SUPPLIES The finisher (large stacker) require the following staple cartridge: Staple cartridge (approx. 5000 staples x 3 cartridges) AR-SC2 1-47 Contents