Sharp MX-M503 MXM283 MXM363 MXM453 MXM503 Operation Guide - Page 227

COPIER REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption. Originals B/W Reverse copy 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. 2 (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. ☞ [Image Edit] KEY (page 2-104) (1) (2) Special Modes OK Image Edit OK 3 Photo Repeat 11x17 Full Bleed Multi-Page Enlargement Centering Mirror Image B/W Reverse Select B/W Reverse. (1) Touch the [B/W Reverse] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 4 have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). 2-115 Contents