Sony DAV-IS10/W Operating Instructions - Page 90
INTERLACE NORMAL, PROGRE PROGRESSIVE, output from the HDMI OUT high
UPC - 027242724174
View all Sony DAV-IS10/W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
x "INTERLACE" (NORMAL) Select this setting when: - your TV does not accept progressive signals, or, - the TV is connected to the VIDEO OUT (VIDEO) jack. x "PROGRE" (PROGRESSIVE) Select this setting when: - your TV accepts progressive signals, and, - the TV is connected to the VIDEO OUT (COMPONENT) jacks. Normally select this if the above conditions are met. This automatically detects the software type, and selects the appropriate conversion method. Note that the picture will not be clear or no picture will appear if you select these settings when either of the above conditions is not met. Note • When you connect the control unit and the TV with the HDMI cable during the system is set to "INTERLACE" (NORMAL), the system is set to "PROGRE" (PROGRESSIVE) automatically. Tip • When you connect the control unit and the TV with the HDMI cable, RESOLUTION is used for selecting the type of video signals output from the HDMI OUT jack. For details, see "To select the type of video signal output from the HDMI OUT (high-definition multimedia interface out) jack" (page 90). About DVD software types and the conversion method DVD software can be divided into 2 types: film based software and video based software. Video based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields per second. Film based software is derived from film and displays images at 24 frames per second. Some DVD software contains both video and film. In order for these images to appear natural on your screen when output in progressive format, the progressive signals need to be converted to match the type of DVD software that you are watching. Note • When you play video based software in progressive signal format, sections of some types of images may appear unnatural due to the conversion process when output through the VIDEO OUT (COMPONENT) jacks. Even though you set to "PROGRE" (PROGRESSIVE), images from the VIDEO OUT (VIDEO) jack are unaffected as they are output in the interlace format. To select the type of video signal output from the HDMI OUT (highdefinition multimedia interface out) jack When you connect the control unit and the TV with the HDMI cable, select the type of video signals output from the HDMI OUT (highdefinition multimedia interface out) jack. For details, refer also to the operating instructions supplied with the TV/projector, etc. 1 Press FUNCTION repeatedly to select "DVD." 2 Press RESOLUTION. The current type of video signals appears in the front panel display. Each time you press RESOLUTION, the display changes as follows: t "480p*" r "720p*" r "480p*" r "1080i*" • "480p*": Sends [720 × 480p] video signals. • "720p*": Sends [1280 × 720p] video signals. • "1080i*": Sends [1920 × 1080i] video signals. * i: interlace, p: progressive When connecting to a standard 4:3 screen TV Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 88. 90US