Home » Sony Manuals » Home Theater Systems » Sony DAV-IS10/W » Manual Viewer

Sony DAV-IS10/W Operating Instructions - Page 92

Settings for the Speakers, SPEAKER SETUP]

UPC - 027242724174

Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

selects PCM, DTS, Dolby Digital sound, and MPEG audio tracks in this order. x [MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only) Switches the Multi-disc Resume setting on or off. [ON] [OFF] Stores the resume settings in memory. Does not store the resume settings in memory. Playback restarts at the resume point only for the current disc in the system. x [AUDIO DRC] (DVD VIDEO only) Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night. [OFF] [STANDARD] [MAX] No compression of dynamic range. Reproduces the sound track with the kind of dynamic range that the recording engineer intended. Compresses dynamic range fully. x [AUDIO (HDMI)] Selects the audio output status from the HDMI OUT jack. [OFF] [ON] The sound is not output from the HDMI OUT jack. Outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24 bit PCM signals to 48 kHz/ 16 bit PCM. Note • When you connect the control unit and TV with the HDMI cable and [ON] is selected, AUDIO DRC, A/ V SYNC, TONE, MOVIE/MUSIC, and sound field are not applied to the sound that is output from the TV. Settings for the Speakers [SPEAKER SETUP] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. Select [SPEAKER SETUP] in the Setup Display. For details, see "Using the Setup Display" (page 86). The default settings are underlined. SPEAKER SETUP CONNECTION: DISTANCE(FRONT): DISTANCE(SURROUND): LEVEL(FRONT): LEVEL(SURROUND): TEST TONE: OFF FRONT: YES CENTER: YES SURROUND: YES SUBWOOFER: YES To return to the default setting when changing a setting Select the item, then press CLEAR. Note that only the [CONNECTION] setting does not return to the default setting. x[CONNECTION] If you do not connect center or surround speakers, set the parameters for [CENTER] and [SURROUND]. Since the front speaker and subwoofer setting is fixed, you cannot change them. [FRONT] [YES] [CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used. [SURROUND] [YES]: Normally select this. [NONE]: Select this if no surround speaker is used. [SUBWOOFER] [YES] 92US

Section	Page
WARNING	2
Welcome!	3
About This Manual	6
This System Can Play the Following Discs	6
Note about CDs/DVDs	7
Example of discs that the system cannot play	7
About Multi Session CD	8
Region code	8
Note on playback operations of DVDs and VIDEO CDs	8
Copyrights	8
Getting Started - BASIC -	9
Step 1: Positioning the Speakers	10
Using the subwoofer efficiently	10
Step 2: Connecting the System	13
1 Connecting the Control unit	14
2 Connecting the Speakers	15
3 Connecting the Antenna (Aerial)	15
4 Connecting the AC power cord (mains lead)	17
Step 3: Connecting the TV	18
Step 4: Performing the Quick Setup	19
Getting Started - ADVANCED -	22
Connecting the TV (Advanced)	22
Connecting the TV with the video cord/component video cord/ HDMI cable	22
Connecting the TV with the digital optical cord	24
Connecting Other Components	25
Connecting the system and the other component	25
Installing the Speakers on a Wall	27
Installing the speakers on a wall	27
Basic Operations	31
Playing Discs	31
Enjoying the Radio or Other Components	34
Selecting the connected component	34
Changing the input level of the sound from connected components	35
Enjoying TV or VCR Sound from All Speakers	36
Selecting the Movie or Music Mode	37
Sound Adjustments	38
Enjoying Surround Sound by Using Sound Field	38
Automatic outputting of the original sound	38
Outputting the sound from multiple speakers	38
Outputting 2 channel sources like CDs by 5.1channel	38
Enjoying the sound effect	39
Adjusting the Bass, Middle, and Treble Level	39
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync	40
Preparing for the HDMI CONTROL function	41
Setting [HDMI CONTROL] function	41
Watching DVD by a Single Button Press	43
Enjoying the TV Sound from the Speakers in this System	44
Turning off the System with the TV	45
Enjoying STB (Set Top Box) Digital Sound or Digital Satellite Receiver Sound from the System	46
Connecting the system	46
Setting [STB SYNCHRO]	46
Enjoying digital sound	47
Various Functions for Playing Discs	48
Searching for a Particular Point on a Disc	48
Locating a point quickly by playing a disc in fast forward or fast reverse (Scan)	48
Watching frame by frame (Slow-motion Play)	48
Playing one frame at a time (Freeze Frame)	48
Searching for a Title/ Chapter/Track/Scene, etc.	49
Searching by Scene	50
Resuming Playback from the Point Where You Stopped the Disc	51
Creating Your Own Program	52
Playing in Random Order	54
Playing Repeatedly	55
Using the DVD’s Menu	56
Changing the Sound	56
Checking the audio signal format	57
Selecting [ORIGINAL] or [PLAY LIST] on a DVD-R/ DVD-RW	58
Viewing Information About the Disc	59
Viewing the playing time and remaining time in the front panel display	59
Checking the playing time and remaining time on the TV screen	60
Checking the play information of the disc	61
Checking the date information	61
Changing the Angles	62
Displaying the Subtitles	62
Adjusting the Delay Between the Picture and Sound	63
About MP3 Audio Tracks and JPEG Image Files	63
What is MP3/JPEG?	63
Discs that the system can play	63
MP3 audio track or JPEG image file that the system can play	63
Playback order of MP3 audio tracks or JPEG image files	64
Playing DATA CDs or DATA DVDs with MP3 Audio Tracks and JPEG Image Files	65
Selecting an MP3 audio track or album	65
Selecting a JPEG image file or album	66
Playing Audio Tracks and Images as a Slide Show with Sound	67
Specifying the slide show duration	68
Selecting an effect for image files in the slide show	68
Playing VIDEO CDs with PBC Functions (Ver.2.0)	69
Tuner Functions	70
Presetting Radio Stations	70
Changing the AM tuning interval	70
Listening to the Radio	71
Naming preset stations	72
Viewing the station name or frequency in the front panel display	72
Other Operations	73
Controlling the TV with the Supplied Remote	73
Controlling TVs with the remote	73
Enjoying Multiplex Broadcast Sound	75
Enjoying the Sound at Low Volume	75
Using the Sleep Timer	76
Changing the Brightness of the Front Panel Display	76
Changing the Display Mode	77
Changing the Display Appearance of the Soft- touch Buttons	77
Using the DIGITAL MEDIA PORT Adapter	78
Playing the connected component on the system	78
Advanced Settings and Adjustments	80
Locking Discs	80
Preventing playback of specific discs [CUSTOM PARENTAL CONTROL]	80
Limiting playback for children [PARENTAL CONTROL]	81
Changing the password	83
Calibrating the Appropriate Settings Automatically	83
Using the Setup Display	86
Setting the Display or Sound Track Language	87
Settings for the Display	88
Custom Settings	91
Settings for the Speakers	92
Adjusting the speaker level by using the test tone	94
Returning to the Default Settings	95
Returning the sound field settings or radio settings to the default	95
Returning the settings on the Setup Display to the default	95
Additional Information	96
Precautions	96
Notes about the Discs	97
Troubleshooting	97
Self-diagnosis Function	101
Specifications	102
Glossary	104
Language Code List	107
Parental Control Area Code List	107
Index to Parts and Controls	108
Control unit (front panel)	108
Front Panel Display	110
Subwoofer	111
Remote control	112
Guide to the Control Menu Display	113
Control Menu display	113
DVD Setup Display List	116
System Menu List	118
Tuner Menu List	118

Match case Limit results 1 per page

selects PCM, DTS, Dolby Digital sound, and MPEG

audio tracks in this order.

[MULTI-DISC RESUME] (DVD VIDEO/

VIDEO CD only)

Switches the Multi-disc Resume setting on or

off.

[AUDIO DRC] (DVD VIDEO only)

Narrows the dynamic range of the sound track.

Useful for watching movies at low volume late

at night.

[AUDIO (HDMI)]

Selects the audio output status from the HDMI

OUT jack.

Note

• When you connect the control unit and TV with the

HDMI cable and [ON] is selected, AUDIO DRC, A/

V SYNC, TONE, MOVIE/MUSIC, and sound field

are not applied to the sound that is output from the

TV.

To obtain the best possible surround sound, set

connection of the speakers and their distance

from your listening position. Then use the test

tone to adjust the level and the balance of the

speakers to the same level.

Select [SPEAKER SETUP] in the Setup

Display. For details, see “Using the Setup

Display” (page 86).

The default settings are underlined.

To return to the default setting

when changing a setting

Select the item, then press CLEAR. Note that

only the [CONNECTION] setting does not

return to the default setting.

[CONNECTION]

If you do not connect center or surround

speakers, set the parameters for [CENTER] and

[SURROUND]. Since the front speaker and

subwoofer setting is fixed, you cannot change

them.

[ON]

Stores the resume settings in

memory.

[OFF]

Does not store the resume settings

in memory. Playback restarts at

the resume point only for the

current disc in the system.

[OFF]

No compression of dynamic

range.

[STANDARD]

Reproduces the sound track with

the kind of dynamic range that the

recording engineer intended.

[MAX]

Compresses dynamic range fully.

[OFF]

The sound is not output from the

HDMI OUT jack.

[ON]

Outputs audio signals by

converting Dolby Digital, DTS, or

96 kHz/24 bit PCM signals to 48

kHz/ 16 bit PCM.

Settings for the Speakers

[SPEAKER SETUP]

[FRONT]

[YES]

[CENTER]

[YES]

: Normally select this.

[NONE]: Select this if no center

speaker is used.

[SURROUND]

[YES]

: Normally select this.

[NONE]: Select this if no

surround speaker is used.

[SUBWOOFER]

[YES]

SPEAKER SETUP

DISTANCE(FRONT):

DISTANCE(SURROUND):

LEVEL(FRONT):

LEVEL(SURROUND):

OFF

TEST TONE:

CONNECTION:

FRONT:

CENTER:

YES

SURROUND:

SUBWOOFER: