Sony DSC-T2/P Cyber-shot® Handbook - Page 113
Printing, PictBridge compliant printer, Cannot save images.
View all Sony DSC-T2/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting Cannot save images. • Images shot with the camera are saved in the internal memory. If the internal memory has available memory left, the image will not be recorded in "Memory Stick Duo" even if it is inserted in the camera. The images will be recorded in "Memory Stick Duo" after the internal memory is full. Printing See "PictBridge compliant printer" together with the following items. Images are printed with both edges cut off. • Depending on your printer, all the edges of the image may be cut off. Especially when you print an image shot with the image size set to [16:9], the lateral end of the image may be cut off. • When printing images using your printer, cancel the trimming or borderless settings. Consult the printer manufacturer as to whether the printer provides these functions or not. • When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges. Cannot print images with the date. • Using "Picture Motion Browser", you can print images with date. • This camera does not have a feature for superimposing dates on images. However, because the images shot with the camera include information on the recording date, you can print images with the date superimposed if the printer or the software can recognize Exif information. For compatibility with Exif information, consult the manufacturer of the printer or the software. • If you use a photo printing service, ask them to superimpose the dates on images. PictBridge compliant printer A connection cannot be established. • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. • Check that the printer is turned on and can be connected to the camera. • Set [USB Connect] to [PictBridge] (page 80). • Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. 113 Troubleshooting