Sony PEG-NZ90 Read This First Operating Instructions - Page 25
Following the on-screen instruction, tap the center of the, displayed mark., Tap the, Tap the arrow
View all Sony PEG-NZ90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Performing the initial settings 4 Following the on-screen instruction, tap the center of the displayed mark. Note If the digitizer is not configured correctly, the scroll bar may not operate properly, "tapping" may not work as expected, or other problems may occur. For re-configuring the digitizer, refer to "Customizing your Sony CLIÉ handheld (Preferences): Adjusting the digitizer" in the "Handbook." After calibration is completed, a screen for setting the time and date appears. 5 Tap the Set Time box. The Set Time screen is displayed. Tip You can reconfigure the date and time settings in the Preferences screen. b For details, refer to "Setting the Date & Time preferences" in the "Handbook." 6 Tap the arrow v or V to set the current time. Tap each box to set the current hour and minute. 7 Tap OK. The current time is set and the Setup screen is displayed. Continued on next page 25