Sony SR60 Handycam Handbook - Page 105
Adjusting the image during recording, STEADYSHOT] does not function.
UPC - 027242698970
View all Sony SR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
The actual recording time for movie is less than the expected approximate recording time. • When you record an object that moves fast, the time available for recording may shorten (p.19, 60). The recording stops. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. • The maximum continuous recordable time is approximately 13 hours. • If you keep applying vibration on the camcorder, recording may stop. • Fragmentation has occurred. Perform [HDD FORMAT] (p.58). There is a time difference between the point where you press START/STOP and the point that the recorded movie starts/stops. • On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction. Adjusting the image during recording Refer also to "Setup items" (p.107). The auto focus does not function. • Set [FOCUS] to [AUTO] (p.53). • The recording conditions are not suitable for auto focus. Adjust the focus manually (p.53). [STEADYSHOT] does not function. • Set [STEADYSHOT] to [ON] (p.55). • [STEADYSHOT] may not work for an excessive camera shake even if [STEADYSHOT] is set to [ON]. The back light function does not function. • The back light function is cancelled when you set [EXPOSURE] to [MANUAL] (p.52) or select [SPOT METER] instead (p.51). • The back light function does not work during Easy Handycam operation. Cancel Easy Handycam operation (p.29). A vertical band appears when recording candlelight or electric light in the dark. • This occurs when the contrast between the subject and the background is too high. This is not a malfunction. A vertical band appears when recording a bright subject. • This phenomenon is called the smear effect. This is not a malfunction. 105 Troubleshooting