Sony UWPV6/4244 Operating Instructions - Page 31
Plug-on transmitter (UTX- P1), Audio input connector XLR type, AF/PEAK audio frequency/peak
View all Sony UWPV6/4244 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Plug-on transmitter (UTXP1) Front side Bottom side a Audio input connector (XLR type) Connect a microphone or a line output connector of an audio mixer, etc. b AF/PEAK (audio frequency/peak level) indicator Turns on or off according to the audio input level as follows. Audio input level INPUT selector position MIC LINE +8 dBV or more - On (red) -9 dBV or more and less than +8 dBV - On (green) Less than -9 dBV - Off -40 dBV or more On (red) - -60 dBV or more On - and less than -40 (green) dBV Less than -60 dBV Off - c INPUT (input signal) selector Set this selector to MIC when a microphone is connected to the audio input connector; set it to LINE when an audio mixer, etc. is connected to the audio input connector. Notes • The UTX-P1 does not support external power supply. Do not connect a microphone which requires external power supply. • Do not set the INPUT selector to MIC position while the audio signal is being input from the audio mixer, etc. Doing so may cause excessive audio input, resulting in distorted playback or recorded sound or damage to the playback or recording equipment. d Display section The channel indication (D) for U30 model is shown. 31 Parts Identification