Sony UWPV6/4244 Operating Instructions - Page 34
Diversity tuner module (URX-M2), Display
View all Sony UWPV6/4244 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
i OUTPUT (audio output) connector (3.5-mm diameter stereo mini jack) Connect one end of the supplied XLR-BMP conversion output cable for the URX-P2 or the stereo mini plug-BMP conversion cable here and the other end to the microphone input on a camcorder, mixer, or amplifier. If the microphone input connector on the device connected to the tuner is a stereo mini jack, connect the straight (BMP) plug to the tuner and the L-shaped (stereo mini) plug to the microphone input connector on the device. Note To prevent damaging the tuner, do not apply power voltage to this connector through the connection to external devices. Diversity tuner module (URX-M2) a SET button Press to change and enter display parameters. For details, see "Tuner Settings" on page 43. b RF (radio frequency) indicator The color indicates the strength of the RF input signal. On (green): RF input is 25 dBµ1) or more. Off: RF input is less than 25 dBµ1). 1) 0 dBµ = 1 µVEMF c Display section The channel indication (C) for U30 model is shown. A RF (radio frequency) indications The number of dots indicates the RF input level. B AF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level. C GP (group)/CH (channel) indication Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows. For details, see"Tuner Settings" on page 43. Reception channel group and number Reception frequency Press the SET button. The channel/frequency indications for U30 model are shown. d + (+ selection) / - (- selection/reset) buttons Press these buttons to set the reception channel and frequency. 34 Parts Identification