Sony UWPV6/4244 Operating Instructions - Page 33
CH channel indication, RF radio frequency indications
View all Sony UWPV6/4244 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Note Do not connect headphones with a monaural mini jack. This may lead to shortcircuiting of the headphone output, resulting in distorted sound output. c RF (radio frequency) indicator The color indicates the strength of the RF input signal. On (green): RF input is 15 dBµ1) or more. Off: RF input is less than 15 dBµ1). 1) 0 dBµ = 1 µVEMF d POWER switch Turns the power of the tuner ON or OFF. e Battery compartment Accommodates two LR6 (size AA) alkaline batteries. For details on how to insert the batteries, see "Power Supply" on page 35. f + (+ selection) / - (- selection/reset) buttons Press these buttons to set the transmission channel, frequency, or attenuation level of the input signal. The "-" button resets the accumulated use time to "00:00". g SET button Press to change and enter display parameters. For details, see "Tuner Settings" on page 43. h Display section The channel indication (C) for U30 model is shown. A RF (radio frequency) indications The number of dots indicates the RF input level. B AF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level. C BATT (battery) indication Shows the battery condition. For details, see "Battery indication" on page 36. D CH (channel) indication Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows. For details, see"Tuner Settings" on page 43. Reception channel group and number Reception frequency Press the SET button. Accumulated use time The channel/frequency indications for U30 model are shown. 33 Parts Identification