Sony UWPV6/4244 Operating Instructions - Page 38

To attach the holder clip to the microphone To attach the belt clip Push the holder clip against the bottom of the microphone until the holder clip clicks into place. To take the slack out of the microphone cable Run the cable through the clamping part of the holder clip. To attach the wind screen to the microphone Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side. To remove the belt clip Insert the microphone into the hole at the bottom of the windscreen. Insert a pointed object such as a ballpoint pen between the belt clip and the transmitter to make some space between them, and then remove the end of the belt clip from the hole on the side of the transmitter. 38 Attachment and Installation Procedures