Sony UWPV6/4244 Operating Instructions - Page 59

Specifications Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. Transmitters (UTX-B2/H2/ P1) Items common to all transmitters Oscillator type Crystal-controlled PLL synthesizer Carrier frequencies Model available in USA: 566 to 590 MHz (U30 model), 638 to 662 MHz (U42 model) Model available in Europe: 798 to 822 MHz (CE62 model), 838 to 862 MHz (CE67 model) Operating frequency band 24 MHz BW Pre-emphasis 50 µs Distortion 1.0% or less (-60 dBV, 1 kHz input) Signal-to-noise ratio 60 dB or more Tone signal 32 kHz Attenuation 0 to 21 dB, in 3-dB steps Display Channel, frequency, audio level, RF level, accumulated use time Power requirements 3.0 V DC (two LR6/AA size alkaline batteries) Operating temperature 0°C to 50°C (32°F to 122°F) Storage temperature -20°C to +55°C (-4°F to +131°F) Body-pack transmitter (UTXB2) Antenna 1/4λ wave length wire Audio input connector 3.5-mm dia. mini jack Reference audio input level -60 dBV (at 0 dB attenuation level) RF output level 30 mW/5 mW selectable Reference deviation ±7 kHz (-60 dBV, 1 kHz input) Frequency response 40 Hz to 18 kHz Indicator AF/PEAK level Battery life Approx. 8 hours (measured with two Sony LR6/AA size alkaline batteries at 25°C (77°F), with output power of 30 mW) 59 Specifications