Sony UWPV6/4244 Operating Instructions - Page 47
Transmitter Settings, Setting the transmission channel
View all Sony UWPV6/4244 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3 Press the - button. The time indication resets to "00:00." While "00:00" is still displayed, you can return to previous value by pressing the + button. 4 Leave the tuner for about 10 seconds or press down the SET button for more than one second. The time indication stops flashing and the results are stored in memory. Transmitter Settings Setting the transmission channel The procedure below is the same for all UWP series transmitters (UTX-B2/H2/P1). Refer to the pdf files "Sony Wireless Microphone System Frequency List" on the supplied CD-ROM for details on the selectable channel groups and channels (for U30, U42, CE62, and CE67 models). 1 Turn on the transmitter while pressing down the SET button. Keep pressing the SET button until the display section parameters that were displayed when the unit was last turned off start to flash. 2 Press the SET button repeatedly until the channel number (or frequency) indication appears. 3 Press the + or - button to select the channel number (or frequency). Pressing the + button cycles the indication in the order shown in the tables in the pdf files "Sony Wireless Microphone System Frequency List" on the supplied CD-ROM (for U30, U42, CE62, and CE67 models). Pressing the - button cycles the indications in the opposite direction. Hold down the + or - button to change the channel number (or frequency) faster. 47 Transmitter Settings